Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!mnetor!seismo!rutgers!cbmvax!grr
From: grr@cbmvax.cbm.UUCP (George Robbins)
Newsgroups: sci.electronics
Subject: Re: Neutral-Ground Shorts
Message-ID: <1989@cbmvax.cbmvax.cbm.UUCP>
Date: Tue, 9-Jun-87 06:01:40 EDT
Article-I.D.: cbmvax.1989
Posted: Tue Jun  9 06:01:40 1987
Date-Received: Fri, 12-Jun-87 02:45:36 EDT
References: <820@sdcc12.ucsd.EDU> <583@inuxh.UUCP>
Reply-To: grr@cbmvax.UUCP (George Robbins)
Organization: Commodore Technology, West Chester, PA
Lines: 13

In article <583@inuxh.UUCP> rmrin@inuxh.UUCP (D Rickert) writes:
> 
> Neutral and ground should be tied together.  Look out for the outlets
> in which it isn't.  

Neutral and ground should be tied together *** at or near the fusebox ***.
Having them tied together at the outlet is wrong and a good indiction that
you should look for more questionable and dangerous wiring practices.

-- 
George Robbins - now working for,	uucp: {ihnp4|seismo|rutgers}!cbmvax!grr
but no way officially representing	arpa: cbmvax!grr@seismo.css.GOV
Commodore, Engineering Department	fone: 215-431-9255 (only by moonlite)