Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!mnetor!seismo!mimsy!aplcen!aplvax!mjj
From: mjj@aplvax.UUCP (Marshall J. Jose)
Newsgroups: sci.electronics
Subject: Re: PC board photo etching kits
Message-ID: <691@aplvax.UUCP>
Date: Sat, 4-Jul-87 16:18:41 EDT
Article-I.D.: aplvax.691
Posted: Sat Jul  4 16:18:41 1987
Date-Received: Sun, 5-Jul-87 00:20:11 EDT
References: <2392@uwmcsd1.UUCP> <10524@sri-spam.istc.sri.com> <2409@uwmcsd1.UUCP>
Reply-To: mjj@aplvax.UUCP (Marshall J. Jose)
Organization: The Johns Hopkins University Applied Physics Laboratory
Lines: 17
Keywords: PC boards,GC electronics


	For several months now, Ham Radio magazine has run a
small ninth-page ad for copier-aided PC fabrication stuff.  It seems
you put a swatch of this stuff in the hopper of a dry-toner
copier, and copy your positive PC design onto it.  Take the
resulting copy and iron it on to your copper-clad, then etch.
I thought it was a pretty slick idea, but I've never heard of
anybody who's actually used it.  Here's the particulars:
Product:	TEC-200 film,  $3.95/qty 5
MFR:		The Meadowlake Corp.
		Dept. UV, P.O. Box 497
		Northport, NY 11768
Phone:		not given; if it was I wouldn't have given the addr.

Disclaimer:  I don't know dis company from nuthin and neither duz
my employer.  So there.
				aplcen!aplvax!msom