Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!utgpu!water!watmath!clyde!rutgers!rochester!udel!burdvax!sdcrdcf!trwrb!trwrc!agnew
From: agnew@trwrc.UUCP
Newsgroups: comp.bugs.sys5
Subject: Re: CLOCAL, or catch-22
Message-ID: <199@trwrc.UUCP>
Date: Tue, 18-Aug-87 13:56:36 EDT
Article-I.D.: trwrc.199
Posted: Tue Aug 18 13:56:36 1987
Date-Received: Fri, 21-Aug-87 01:37:36 EDT
References: <325@nsta.UUCP> <25073@sun.uucp> <3607@sdcsvax.UCSD.EDU> <166@tmsoft.UUCP>
Organization: TRW-MEAD, San Diego, Ca.
Lines: 15

In article <166@tmsoft.UUCP>, mason@tmsoft.UUCP (Dave Mason) writes:
> 
> There have been a couple of postings of getty's for modems (for use dialing
> out & in on the same line) which would have the base for what you need, but

Anyone know where I can dig up one of these? I have same problem with a DSI-32
board running SysV.2. It doesn,t support automatic call units so to call I have to 
overwrite inittab, kill -1 1, manually flip the carrier detect switch on
the modem, CU on the direct port, and manually dial -- a real pain! UUCP uses the
direct port and dials by putting the Hayes commands in the auto-login field in L.sys --
talk about kludges!!! Actually I would like to locate uucico rather than getty, but
getty would be helpfull too.
							ucbvax!trwrb!trwrc!agnew
							sdcsvax!hp-sdd!trwrc!agnew
							hplabs!hp-sdd!trwrc!agnew