Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!mnetor!uunet!husc6!rutgers!ucla-cs!zen!ucbvax!cbosgd!osu-eddie!osupyr!glazer
From: glazer@osupyr.UUCP (Jon Glazer)
Newsgroups: comp.sys.ibm.pc,comp.lang.pascal
Subject: HELP FOR TURBO BIOS CALLS NEEDED!!
Message-ID: <88@osupyr.UUCP>
Date: Mon, 10-Aug-87 23:44:19 EDT
Article-I.D.: osupyr.88
Posted: Mon Aug 10 23:44:19 1987
Date-Received: Thu, 13-Aug-87 00:44:22 EDT
Reply-To: glazer@osupyr.UUCP (Jon Glazer)
Distribution: world
Organization: Mathematical Sciences Computer Lab, Columbus, OH
Lines: 19
Xref: mnetor comp.sys.ibm.pc:6599 comp.lang.pascal:246

This is IBM-PC related of course...

I am writing a program that I hope to be able to operate remotely.  The
problem is that I would like to send output through the BIOS so that 
when issuing the command CTTY COM1 (change console to com1) output goes
to correct device.  DOS does this without any problem and so do programs such
as EDLIN.  Could someone tell me how to write such a routine??
 
Thanks in Advance
Jon

*******************************************************************************
*                        *                        * At                        *
*       Jon Glazer       * The |\/|     |  |      *     Ohio State University *
* Sysop of MGS (IBM BBS) *     |  |     |  |      *        Columbus, Ohio     *
*     (614)-848-5971     *     |  |ICRO |/\|IZARD *         Via PYRAMID       *
*                        *                        *     [glazer@osupyr.UUCP]  *
*                        *                        *    [glazer%osupyr@cposgd] *
*******************************************************************************