Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!mnetor!uunet!seismo!husc6!rutgers!ames!ucbcad!ucbvax!voder.UUCP!mao
From: mao@voder.UUCP (Mike Olson)
Newsgroups: comp.laser-printers
Subject: Re: printer queues
Message-ID: <8708012022.AA16974@brillig.umd.edu>
Date: Fri, 31-Jul-87 13:11:26 EDT
Article-I.D.: brillig.8708012022.AA16974
Posted: Fri Jul 31 13:11:26 1987
Date-Received: Sun, 2-Aug-87 10:47:41 EDT
References: <8707301846.AA02745@brillig.umd.edu>
Sender: daemon@ucbvax.BERKELEY.EDU
Distribution: world
Organization: Britton Lee, Inc.
Lines: 15
Approved: laser-lovers@brillig.umd.edu
Summary: check spooling dirs


In article <8707301846.AA02745@brillig.umd.edu>, (Curt Signorino) writes:
> When we send something to either the decwriter or the
> laser printer and then do an lpq, both queues appear to have the
> file even though it was only sent to one of them.  Also, if a job
> is interrupted on the decwriter or the laser printer, it finishes
> printing out on the other.

my guess would be that you're using a single directory to spool jobs for
both printers.  check the /etc/printcap for each of them; the "sd=" entry
should be different for each printer.

					mike olson
					britton lee, inc.
					(...!ucbvax!ucsfcgl!blia!mao)