Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!mnetor!uunet!seismo!rutgers!ucla-cs!zen!ucbvax!decvax!decwrl!pyramid!uccba!hal!ncoast!robertd
From: robertd@ncoast.UUCP (Rob DeMarco)
Newsgroups: comp.misc
Subject: Several Questions on the TRS-80 Model 100
Message-ID: <4090@ncoast.UUCP>
Date: Fri, 7-Aug-87 21:39:45 EDT
Article-I.D.: ncoast.4090
Posted: Fri Aug  7 21:39:45 1987
Date-Received: Sun, 9-Aug-87 11:15:08 EDT
Reply-To: robertd@ncoast.UUCP (Rob DeMarco)
Organization: Cleveland Public Access UN*X, Cleveland, Oh
Lines: 26


    I have a few questions on the Model 100.

	a) Where are the registers stored in the Model 100 CPU?

	b) How may I call up a ROM program (BASIC, TEXT, etc.) and have it re-
turn to the next BASIC (or M/L) line. That is, return to the calling routine
instead of going to the menu.

	c) How may I call up BASIC and have it load and run a program using
the "CALL" command?

	d) Where may i obtain a free, public domain assembler/zbug program
writen in M/L. (And in a .hex file format).

	e) I would appriciate greatly if someone emailed an assembler/debugger.
If you do and its in M/L, please suply a HEX file accompinied by the loader.

	Thanks in advance,
		[> Rd
-- 
North Coast Computer Resources(ncoast) - 216-781-6201 (or 781-6202)

UUCP:decvax!cwruecmp!ncoast!robertd

Sysop: NEODG (login "sbbs")