Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!mnetor!uunet!seismo!rutgers!ames!amdcad!sun!texsun!convex!techsup!authorplaceholder
From: kenb@techsup.UUCP
Newsgroups: comp.os.cpm
Subject: info on mbasic
Message-ID: <-79388957@techsup>
Date: Tue, 28-Jul-87 10:04:00 EDT
Article-I.D.: techsup.-79388957
Posted: Tue Jul 28 10:04:00 1987
Date-Received: Fri, 7-Aug-87 06:07:05 EDT
Lines: 20
Nf-ID: #N:techsup:-79388957:000:689
Nf-From: techsup.UUCP!kenb    Jul 28 09:04:00 1987


i've got a radio shack model ii running cp/m.  i've added the graphics
board upgrade and have always used the graphics basic supplied with the
graphics board.  unfortunately, this basic does not run on cp/m.

what i am looking for is either a graphics basic for this system that
runs under cp/m (i doubt such an animal exists) or information on how
mbasic 5.x is constructed so that i may modify it to add my own
routines.  i know about calls and usr routines, and this is an option,
but not my first choice.

if anyone has any information that they could pass along, or point me in the
right direction i'd appreciate it.

thanks

ken brookner

	uucp:	ihnp4!techsup!kenb
	genie:	kbrookner