Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP Path: utzoo!mnetor!uunet!husc6!hao!ames!ucbcad!ucbvax!cc.uofm.CDN!busu From: busu@cc.uofm.CDN (Daniel Keizer) Newsgroups: comp.os.cpm Subject: Osborne IEEE -> Centronics Message-ID: <23*busu@cc.uofm.cdn> Date: Tue, 18-Aug-87 12:22:59 EDT Article-I.D.: cc.23*busu Posted: Tue Aug 18 12:22:59 1987 Date-Received: Thu, 20-Aug-87 03:52:56 EDT Sender: daemon@ucbvax.BERKELEY.EDU Distribution: world Organization: The ARPA Internet Lines: 40 Here is an exerpt of a message I am forwarding to the net for others who might have such a need. ================== Date: 17 Aug 87 18:58 +0600 From: Daniel Keizer To: SAC.HQSAC-DOCT@e.isi.edu In-Reply-To: <[E.ISI.EDU]15-Aug-87 14:26:05.SAC.HQSAC-DOCT> Message-ID: <19*busu@cc.uofm.cdn> Subject: Re: Osborne Exec output to printers Return-Receipt-To: Daniel Keizer Hi again ... I managed to dig up the specs on the IEEE -> Centronics parallel port D connector. Specs is as follows: Cen Ozzy 1 11 2 1 3 3 4 5 5 7 6 2 7 4 8 6 9 8 11 15 13 19 19 12 29 18 The osborne connector is numbered with one being in the upper right corner and the numbers alternating across the printed circuit edge. Thanks to Gordon McAndrew, Brandon University, Manitoba, CANADA Dan Keizer. BUSU@CC.UOFM.CDN BUSU@UOFMCC.BITNET