Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP Path: utzoo!mnetor!uunet!seismo!columbia!rutgers!ucla-cs!zen!ucbvax!YALE.ARPA!LEICHTER-JERRY From: LEICHTER-JERRY@YALE.ARPA Newsgroups: comp.os.vms Subject: re: Wanted - TEX.DVI -> HP LaserJet Software Message-ID: <8707291018.AA18077@ucbvax.Berkeley.EDU> Date: Wed, 29-Jul-87 06:18:52 EDT Article-I.D.: ucbvax.8707291018.AA18077 Posted: Wed Jul 29 06:18:52 1987 Date-Received: Fri, 31-Jul-87 02:22:25 EDT Sender: daemon@ucbvax.BERKELEY.EDU Reply-To: Distribution: world Organization: The ARPA Internet Lines: 23 An excellent TeX driver for the HP LaserJet - and several other devices - is available, free, from the University of Utah. Write to the author at: "Nelson H.F. Beebe" (Unfortunately, the VMS version doesn't work quite right - a couple of very minor problems. I recently fixed it to work correctly on a LaserJet Plus - which, BTW, is recommended for TeX; you can use a straight LaserJet, but the limitations will show.) I'll be sending my patches back to Mr. Beebe "one of these days"; in the meantime, if you decide to use this software, write to me and I'll send you what I've got.) The software is written in very portable C - it (at least theoretically) runs on Unix, TOPS-20, VMS, and MS-DOS, and drives about 6 or 7 different kinds of printers. It's all PD. And before you ask...I am NOT willing to re-distribute this software. Contact the author. BTW, my experience with the stuff so far has been EXTREMELY positive - best driver I've seen, actually. -- Jerry -------