Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!mnetor!uunet!seismo!rutgers!ucla-cs!zen!ucbvax!ucdavis!nagel@iris (Mark Nagel)
From: nagel@iris (Mark Nagel)
Newsgroups: comp.os.vms
Subject: US Robotics 2400 & uVAX II
Message-ID: <670@ucdavis.UUCP>
Date: Thu, 6-Aug-87 16:31:04 EDT
Article-I.D.: ucdavis.670
Posted: Thu Aug  6 16:31:04 1987
Date-Received: Sat, 8-Aug-87 12:49:39 EDT
Sender: uucp@ucdavis.UUCP
Reply-To: nagel@iris (Mark Nagel)
Distribution: world
Organization: University of California, Davis
Lines: 19

I am having a problem getting our US Robotics 2400 modem to function correctly
with our microVAX II (VMS 4.5).  It works fine for dialout, but for dialing in
I can't seem to set things up correctly.  I have tried setting the terminal with
a variety of flags and messing with DIP switches on the modem, but I can't
seem to get it functioning correctly.  If someone has one of these set up
and working, could you mail me the correct terminal and modem DIP switch
settings?  The problems I get range from the modem answering but not raising
a carrier to actually connecting and logging in, but never twice in a row.
I am really just interested in seeing a working configuration.

--- Mark Nagel

Disclaimer: No one is accountable for my babbling but myself.

>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>> nagel@iris.ucdavis.edu					ARPA
>>> mdnagel@ucdavis						BITNET
>>> ..!{ucbvax,sdcsvax,lll-crg}!ucdavis!iris!nagel		UUCP
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>