Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!mnetor!uunet!husc6!sri-unix!rutgers!ucla-cs!zen!ucbvax!NCSC.ARPA!vtcf
From: vtcf@NCSC.ARPA (Williams)
Newsgroups: comp.os.vms
Subject: HSC name
Message-ID: <8708171753.AA02502@ncsc.ARPA>
Date: Mon, 17-Aug-87 13:53:51 EDT
Article-I.D.: ncsc.8708171753.AA02502
Posted: Mon Aug 17 13:53:51 1987
Date-Received: Wed, 19-Aug-87 01:20:39 EDT
Sender: daemon@ucbvax.BERKELEY.EDU
Distribution: world
Organization: The ARPA Internet
Lines: 17


I have a hopefully easy question.  When we added an HSC50 to our system aem and
clustered, the DEC people made the CI # on the HSC 0, on one VAX 6, and on
the other VAX 7.  However, they told me I should name my HSC HSC007 since it
was connected to a VAX with CI port # 7.  Not knowing any better at the time,
I did it.  Now I would like to change it's name to HSC000.  What do I do, and
in what order?  I know I need to change it on the HSC, in MODPARAMS.DAT, and
probably a few other places.  Also, what needs to be done to change the CI #'s
on the VAXes to 1 and 2, so I can reduce Polling?  I'd like to do this with
a minimum number of reboots, as we run some LONG jobs (some take a week!).  
Any help will be GREATLY appreciated.

Thanks in advance,
Tom Williams
Naval Coastal Systems Center
(904)234-4699
vtcf@ncsc.arpa