Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!utgpu!water!watmath!clyde!rutgers!gatech!amdcad!phil
From: phil@amdcad.UUCP
Newsgroups: comp.protocols.tcp-ip
Subject: Re: Blue Book
Message-ID: <17950@amdcad.AMD.COM>
Date: Tue, 18-Aug-87 16:33:08 EDT
Article-I.D.: amdcad.17950
Posted: Tue Aug 18 16:33:08 1987
Date-Received: Thu, 20-Aug-87 01:58:32 EDT
References: <8708112229.AA00510@apolling.imagen.uucp>
Reply-To: phil@amdcad.UUCP (Phil Ngai)
Distribution: world
Organization: Advanced Micro Devices, Inc., Sunnyvale, Ca.
Lines: 18

In article <8708112229.AA00510@apolling.imagen.uucp> geof@apolling.UUCP (Geof Cooper) writes:
>
>PS: The cover IS blue on version 2.  The cover of version 1 was gray
>    with a blue stripe.

Hm, my version 1.0 is all blue. So is my 2.0, but a different tint.  I
got them from the Xerox office in Sunnyvale, which used to be Shugart
facilities. But that's not the reason for this article.

I heard there was a mistake in the example transceiver cable receiver
circuit which was never fixed. I must say I can't understand why the
data valid signal is fed back to those two line termination resistors
(39 ohms). Any comments?

-- 
I speak for myself, not the company.

Phil Ngai, {ucbvax,decwrl,allegra}!amdcad!phil or amdcad!phil@decwrl.dec.com