Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!mnetor!uunet!seismo!gatech!bloom-beacon!husc6!cca!jack
From: jack@cca.CCA.COM (Jack Orenstein)
Newsgroups: comp.sys.amiga
Subject: AmigaDOS question
Message-ID: <18542@cca.CCA.COM>
Date: Mon, 3-Aug-87 09:47:05 EDT
Article-I.D.: cca.18542
Posted: Mon Aug  3 09:47:05 1987
Date-Received: Tue, 4-Aug-87 02:19:54 EDT
Distribution: na
Organization: Computer Corp. of America, Cambridge, MA
Lines: 16


After getting all the "I love my Amiga" responses to my poll a few weeks ago,
I went down to the local computer store and picked up an A1000 and some PD
software.

I have a question about how AmigaDOS 1.2 locates commands. I copied a bunch of
commands to ram:c and assigned c: to ram:c. Sometimes, a command will
check the disk, and if workbench is not present, ask me to supply it.
If I repeat the command though, the floppy is not consulted. Why is the disk
being checked and how can I avoid it? (This wouldn't be too serious, but
I only have one floppy for now.)

Thanks


Jack Orenstein