Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!mnetor!uunet!seismo!columbia!rutgers!ucla-cs!zen!ucbvax!cogsci.berkeley.EDU!bryce
From: bryce@cogsci.berkeley.EDU (Bryce Nesbitt)
Newsgroups: comp.sys.amiga
Subject: Re: OnGadget,OffGadget calls
Message-ID: <8708032122.AA14415@cogsci.berkeley.edu>
Date: Mon, 3-Aug-87 17:22:37 EDT
Article-I.D.: cogsci.8708032122.AA14415
Posted: Mon Aug  3 17:22:37 1987
Date-Received: Tue, 4-Aug-87 05:30:37 EDT
Sender: daemon@ucbvax.BERKELEY.EDU
Organization: Institute of Cognitive Studies, UC Berkeley
Lines: 19

In article <525@gouldsd.UUCP> rhafey@gouldsd.UUCP (Rob J Hafey) writes:

>    I'm having problems using the On/OffGadget functions...
> ...My calling procedure follows the Intuition Manuel [sic]...
> ...Are these functions OK or am I fighting some bad documentation? 
>    Please help I'm getting very frustrated (by slow compile times that is).

You must be using Lattice :-) :-) :-) :-) :-) :-) :-)

There is some new documentation relating to On/OffGadget in the V1.2 Enhancer
Software Manual.  This booklet, or equivalent, is really a "must read" for
programmers.
(Available at any dealer, and many mail order houses)

-----
|\ /|  . Ack! (NAK, EOT, SOH)
{O o} . 
( " )	bryce@cogsci.berkeley.EDU -or- ucbvax!cogsci!bryce
  U	"Success leads to stagnation; stagnation leads to failure."