Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!mnetor!uunet!seismo!mcvax!cernvax!perretg
From: perretg@cernvax.UUCP (perretg)
Newsgroups: comp.sys.amiga
Subject: Re: advice on 24-wire *color* dot matrix printers
Message-ID: <516@cernvax.UUCP>
Date: Fri, 7-Aug-87 06:13:52 EDT
Article-I.D.: cernvax.516
Posted: Fri Aug  7 06:13:52 1987
Date-Received: Sun, 9-Aug-87 10:09:40 EDT
References: <10411@linus.UUCP>
Reply-To: perretg@cernvax.UUCP ()
Organization: CERN European Laboratory for Particle Physics, CH-1211 Geneva, Switzerland
Lines: 9

I am using The FUJITSU DL2400 24 wrire color printer, It works fine
even on transparencies for overhead projectors.
However the driver I am using is not perfect (JX-80):
1) It is very slow for graphics, lot of print-head moving for nothing
2) The full graphic resolution does not appear to be implemented

In fact good printer drivers need still to be written for the AMIGA

                                D. PERRET-GALLIX