Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!mnetor!uunet!husc6!necntc!ames!sdcsvax!ucbvax!UNO.BITNET!SJDMK
From: SJDMK@UNO.BITNET
Newsgroups: comp.sys.apple
Subject: Help with Kermit v3.78...
Message-ID: <8708181823.aa12068@SMOKE.BRL.ARPA>
Date: Tue, 18-Aug-87 17:36:00 EDT
Article-I.D.: SMOKE.8708181823.aa12068
Posted: Tue Aug 18 17:36:00 1987
Date-Received: Sun, 23-Aug-87 23:45:06 EDT
Sender: daemon@ucbvax.BERKELEY.EDU
Distribution: world
Organization: The ARPA Internet
Lines: 16

I'm having a little trouble with Kermit v3.78. While emulating a VT100,
it seems that something isn't working right. If I'm in the EDT editor
on a VAX and I try to go down the screen, only the last line changes. All
the other lines don't change at all. Until I try to go back up to the top.
When I do that, all the stuff that should have gone off the top of the screen
when I went down, comes down from the top of the screen when I go up!

I know that paragraph sounds confusing but I didn't know how else to put it.

By the way, VT52 emulation works fine. It's just VT100 that's giving me trouble.


                             Steve

SJDMK@UNO
EDU%"SJDMK%UNO.BITNET@WISCVM.WISC.EDU"