Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!utgpu!water!watmath!clyde!rutgers!ames!amdcad!cae780!scottj
From: scottj@cae780.UUCP
Newsgroups: comp.sys.atari.st
Subject: Re: Minix for the ST
Message-ID: <4330@cae780.TEK.COM>
Date: Fri, 31-Jul-87 19:20:09 EDT
Article-I.D.: cae780.4330
Posted: Fri Jul 31 19:20:09 1987
Date-Received: Sun, 2-Aug-87 07:32:07 EDT
References: <5096@jhunix.UUCP> <195@stag.UUCP>
Reply-To: scottj@cae780.UUCP (Scott Jordahl)
Organization: Tektronix, Inc., CAE Systems Div., Santa Clara, Ca.
Lines: 25
Keywords: minix, release date

In article <195@stag.UUCP> trb@stag.UUCP ( Todd Burkey ) writes:
>How about running Minix under the PC-Ditto Emulator. Has anyone ported
 ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
>the 5 1/4" release over to 3.5"? We are going to be trying it here
>tonite, so will post the results. Actually, everything I have tried so
>far works great (although Lotus and WS were a little slow), so I don't
>expect any major problems.
>  -Todd

The thing everyone should keep in mind is that MINIX is VERY hardware
dependent.  This means that a software emulator doesn't have a chance.
You will just have to be patient until the official ported version is ready.
(Which should be soon, so I here).

-- Scott


+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
FROM:   Scott A. Jordahl, Tektronix/CAE Systems Division
UUCP:   tektronix!teklds!cae780!scottj
	{ihnp4, decvax!decwrl}!amdcad!cae780!scottj 
        {nsc, hplabs, resonex, qubix, leadsv}!cae780!scottj 
ADDR:   5302 Betsy Ross Drive, Santa Clara, CA  95054
AT&T:   [408] 748-4727 [direct]
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++