Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP Path: utzoo!mnetor!uunet!seismo!gatech!bloom-beacon!husc6!psuvax1!jte From: jte@psuvax1.psu.edu (Jon Eckhardt) Newsgroups: comp.sys.att Subject: Adding more disks to ATT 3B2/300 Message-ID: <2810@psuvax1.psu.edu> Date: Mon, 3-Aug-87 15:14:10 EDT Article-I.D.: psuvax1.2810 Posted: Mon Aug 3 15:14:10 1987 Date-Received: Tue, 4-Aug-87 04:25:31 EDT Reply-To: jte@psuvax1.psu.edu (Jon Eckhardt) Distribution: comp Organization: Penn State University, University Park, PA Lines: 20 Keywords: MS-DOS, 3.2, 6300. Summary: Have dead 3bs want to add disks... I have an att 3b2/300, and 2 dead 3b2/300s. I am trying to figure out a way to add the two hard disks from the dead machines to the good machine so I have one machine with 3 hard disks in total. I don't care about the data on the 2 dead machines, but I do about the machine that I would like to set it up on. Here is the current system configuration: 1) Good machine - 72 meg hard disk. 1) 2 bad 32? (whatever the standard number is that is around 30) disks that I would like to setup. I need to figure out how to tell the operating system about the disks, provide power to the disks, and have the disks work :-). Thanks for any help that you can give me with this. --Jon Eckhardt !psuvax1!jte --------------------------------------------------------------------------- PSU #1 Phone: 814-237-1901 Work: (leave message) 814-865-9505 PSU #1