Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!mnetor!uunet!seismo!husc6!psuvax1!jte
From: jte@psuvax1.psu.edu (Jon Eckhardt)
Newsgroups: comp.sys.att
Subject: Re: undocumented option in AT&T System V, Version 2.0
Message-ID: <2816@psuvax1.psu.edu>
Date: Tue, 4-Aug-87 01:05:57 EDT
Article-I.D.: psuvax1.2816
Posted: Tue Aug  4 01:05:57 1987
Date-Received: Wed, 5-Aug-87 05:22:51 EDT
References: <476@musky2.UUCP> <13050011@acf4.UUCP> <1098@laidbak.UUCP> <1106@bucsb.bu.edu.UUCP>
Reply-To: jte@psuvax1.psu.edu (Jon Eckhardt)
Organization: Penn State University, University Park, PA
Lines: 26

>>In article <13050011@acf4.UUCP>, leonard@acf4.UUCP (shanna leonard) writes:
>>The 3B2 firmware password may be reset by unplugging the "non-volatile
>>RAM" battery for a moment while the primary power is off.
>
>	Yea?  I did this and now I get:
>
>	FW ERROR 1-02: DISK SANITY FAILURE
>->Spike

I have done this many times.  In fact, when I was on the phone
with the ATT hotline and told them that my floppy key was not 
working they told me to go ahead and disconnect the battery.
It must have just been a flookie that messed up your disk.  
My guess is that you may have powercycled it a few times rapidly
which may have messed up your disk.

--Jon

I don't get why I can't put less text in then the reply, here I am
adding more and more and more text just to make sure that inews
is happy.  This seams like such a waste.  In fact, it seams
to be a pain in the next to type this stuff in anyway. I think I 
have more characters then the reply now, so lets see if it will take
the post.

ihnp4!psuvax1!jte  jte@psuvax1.BITNET jte@psuvax1.psu.edu