Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!mnetor!uunet!husc6!hao!oddjob!gargoyle!ihnp4!inuxc!iuvax!pur-ee!uiucdcs!uxc.cso.uiuc.edu!ccvaxa!Anonymous
From: Anonymous@ccvaxa.UUCP
Newsgroups: comp.sys.att
Subject: Re: Adding more disks to ATT 3B2/30
Message-ID: <31200004@ccvaxa>
Date: Fri, 7-Aug-87 09:44:00 EDT
Article-I.D.: ccvaxa.31200004
Posted: Fri Aug  7 09:44:00 1987
Date-Received: Sun, 9-Aug-87 11:19:43 EDT
References: <204@rencon.UUCP>
Lines: 13
Nf-ID: #R:rencon.UUCP:204:ccvaxa:31200004:000:534
Nf-From: ccvaxa.UUCP!Anonymous    Aug  7 08:44:00 1987


just some st506 cables and your favorite st506 winchester drive.
The cables can be run from the system board out the back of the 
side service area and into the XM. The drive will have to have 
XM mounting plates made for it. Detach the tape backup and look at
the mounting plate. You will need a nibbler tool to copy it.

There is some software to change if the expansion drive is not identical
to an ATT drive.

You will need a copy of the "devtools" diskette to format the drive.

I done this many times. I will be happy to help.