Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!mnetor!uunet!husc6!cmcl2!rutgers!sri-spam!ames!sdcsvax!ucsdhub!hp-sdd!hplabs!hp-pcd!hpcvlo!dhk
From: dhk@hpcvlo.HP.COM (Dustin Kassman)
Newsgroups: comp.sys.hp
Subject: Re: HP110 batteries
Message-ID: <2710008@hpcvlo.HP.COM>
Date: Wed, 12-Aug-87 18:53:27 EDT
Article-I.D.: hpcvlo.2710008
Posted: Wed Aug 12 18:53:27 1987
Date-Received: Sun, 16-Aug-87 01:45:12 EDT
References: <2156@sphinx.uchicago.edu>
Organization: Hewlett-Packard Co., Corvallis, OR, USA
Lines: 15

This is an unofficial response but maybe it will help.  Yes, a Portable PLUS
battery will work in a 110.  However, the problem may not be your battery.  
If the display goes blank immediately when you unplug the recharger, chances 
are that you have a blown fuse.  Unfortunately, the fuse is not user replaceable
because it is soldered to the circuit board.  On a Portable PLUS it is located 
to the right of the + terminal of the battery and labeled F1.  You should be 
able to check for continuity through it.  Of course, the battery may be bad 
also.  If the problem still exists after replacing the battery you will 
probably have to have the fuse replaced. 

Hope that this helps you get your 110 going.  They are really rugged and alot
of fun (tuck it under your arm and go).  Good luck.

		Dustin Kassman
		!hplabs!hp-pcd!dhk