Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!mnetor!uunet!atina!mrecvax!tron
From: tron@mrecvax.UUCP (Carlos Mendioroz)
Newsgroups: comp.sys.ibm.pc
Subject: Everex 1800 AT compatibility problem.
Message-ID: <373@mrecvax.UUCP>
Date: Tue, 4-Aug-87 16:59:36 EDT
Article-I.D.: mrecvax.373
Posted: Tue Aug  4 16:59:36 1987
Date-Received: Fri, 7-Aug-87 01:29:45 EDT
Organization: M.R.E. y C. Bs. As. Argentina
Lines: 21
Keywords: Everex compatibility
Summary: Have problem with IO_RDY line.

I have been testing an Everex 1800 AT and all was ok till i put
 a board (actually an Ethernet driver) that uses IO_RDY to insert
 wait-states while doing a memory refresh (on the board's memory)
The actual effect is the AT not booting. If you disable the IO_RDY 
 line on the board, all is ok but the board that (curiously ;-)
 refuses to do it's job.
I've tried the board on IBM's and other compatibles and works ok;
 I've also tried Everex' AMI BIOS on an IBM AT with the board and
 that also works!
 Reducing Everex speed to 6MHz didn't.

Any suggestions? 

Carlos G Mendioroz - Ministerio de Relaciones Exteriores y Culto
		     Buenos Aires  ARGENTINA
UUCP : {seismo|uunet|pyramid!utai|decvax!utcsri}!atina!mrecvax!tron 

"I've had nothing yet",Alice replied in an 
offended tone, "so I can't take more."
"You mean you can't take less," said the Hatter:
"it's very easy to take more than nothing."