Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!mnetor!uunet!husc6!cmcl2!rutgers!ames!sdcsvax!nosc!humu!uhccux!aloha1!islenet!jons
From: jons@islenet.UUCP (Jonathan Spangler)
Newsgroups: comp.sys.ibm.pc
Subject: Re: Accessing com3 or com4 on an ibmpc-at
Message-ID: <3419@islenet.UUCP>
Date: Wed, 12-Aug-87 19:39:42 EDT
Article-I.D.: islenet.3419
Posted: Wed Aug 12 19:39:42 1987
Date-Received: Sat, 15-Aug-87 11:48:00 EDT
References: <1174@pacific.UUCP>
Reply-To: jons@islenet.UUCP (Jonathan Spangler)
Organization: Islenet Inc.,  Honolulu
Lines: 17
Keywords: COM3 COM4 MSDOS

>I have an IBM PC/AT that I currently need to add two more com ports (com3 and
>com4).  The card I purchased is switchable for that range ports 3 and 4, my 
>question is, How do I get msdos 3.1 or 3.2 to recognize a com3 or com4
>=========================>>>>>>>>>>>>>>Thomas Hutton
>                         {ucbvax,decvax,seismo}sdcsvax!pacific!hutton
>

You need a copy of DOS 3.3, which, among other things, supports four serial
ports.
 
Aloha,

-- 
Jonathan Spangler
{ihnp4,vortex,dual}!islenet!jons
	OR
jons@islenet.hawaii.edu