Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!mnetor!uunet!husc6!linus!philabs!sbcs!pmt
From: pmt@sbcs.UUCP (Phil Tromovitch)
Newsgroups: comp.sys.ibm.pc
Subject: Re: need help with PROCOMM
Message-ID: <500@sbcs.UUCP>
Date: Fri, 14-Aug-87 15:45:11 EDT
Article-I.D.: sbcs.500
Posted: Fri Aug 14 15:45:11 1987
Date-Received: Sun, 16-Aug-87 22:39:57 EDT
References: <1987Aug9.131938.20580@utstat.uucp>
Organization: Computer Science Dept, SUNY@Stony Brook
Lines: 28

>          I am trying to use a Smarteam modem with PROCOMM and when I try to
> dial (using ALT-D, option m (manual), atdt ...-....), I hear the normal
> telephone tone (same as when you pick up the phone to dial) along with the
> actual dialing superimposed on it. After a few seconds, a taped message from
> the operator states that the call did not go through and that I should try
> again.
> 
>        	{allegra,ihnp4,linus,decvax}!utzoo!utstat!anthony
>         {ihnp4|decvax|utzoo|utcsrgv}!utgpu!utzoo!utstat!anthony

One of the values that gets passed to the modem in the startup string
tells the modem how long each tone should be.  If the tone is to short
the phone lines may not be able to tell what numbers you were calling.

I don't remember what the code is, but it should be in you modem manual,
and it may be in the procomm documentaion as well.

Good luck!

Phil

-- 

CSNET:pmt@sbcs.csnet
UUCP :{allegra, philabs, ogcvax}!sbcs!pmt

  In the path of our happiness shall we find the learning for which
we have choosen this lifetime.