Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!mnetor!uunet!seismo!columbia!rutgers!mtune!codas!cpsc6a!rtech!wrs!dg
From: dg@wrs.UUCP (David Goodenough)
Newsgroups: comp.sources.wanted,comp.sys.ibm.pc
Subject: Re: 8085 to 8808 converter
Message-ID: <308@wrs.UUCP>
Date: Mon, 17-Aug-87 15:01:29 EDT
Article-I.D.: wrs.308
Posted: Mon Aug 17 15:01:29 1987
Date-Received: Fri, 21-Aug-87 07:29:37 EDT
References: <1513@cci632.UUCP> <1517@cci632.UUCP> <504@mtuxo.UUCP>
Reply-To: dg@wrs.UUCP (David Goodenough)
Organization: Wind River Systems, Emeryville, CA
Lines: 21
Keywords: Conversion program needed
Xref: mnetor comp.sources.wanted:1970 comp.sys.ibm.pc:6878

In article <504@mtuxo.UUCP> dave@mtuxo.UUCP (Dave Lindsay) writes:
>
>I am looking for software that runs in an IBM PC and will read
>CP/M 5 1/4" disks that were created on an Epson CP/M system.
>I have some old information on a product called Xeno-Copy
>from Vertex Systems in Los Angles,CA that claims to read all sorts
>of CP/M formats into an IBM PC machine. However - Vertex apprears to 
>have disappeared! I really need to do this conversion and am willing
>to buy a commercial package or get shareware/etc.

Two packages to look at are Uniform from Integrated Micro Solutions,
DeKalb, Illinois; and Media Master. I'm not 100% sure if Media Master
exists on MS-DOS, but I know you can get Uniform. To find them look
in P.C. magazines, and there should be something there.
--
		dg@wrs.UUCP - David Goodenough

					+---+
					| +-+-+
					+-+-+ |
					  +---+