Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!mnetor!uunet!seismo!columbia!rutgers!ames!sdcsvax!ucsdhub!hp-sdd!hplabs!amdcad!jimb
From: jimb@amdcad.AMD.COM (Jim Budler)
Newsgroups: comp.sys.mac
Subject: Re: Problem with Diskfit 1.1df
Message-ID: <17803@amdcad.AMD.COM>
Date: Tue, 4-Aug-87 01:54:06 EDT
Article-I.D.: amdcad.17803
Posted: Tue Aug  4 01:54:06 1987
Date-Received: Wed, 5-Aug-87 04:49:31 EDT
References: <1226@aecom.YU.EDU> <67100010@cdp> <24304@sun.uucp> <1399@sputnik.COM>
Reply-To: jimb@amdcad.UUCP (Jim Budler)
Organization: Advanced Micro Devices, Inc., Sunnyvale, Ca.
Lines: 24

In article <1399@sputnik.COM> moriarty@tc.fluke.COM (Jeff Meyer) writes:
} In article <24304@sun.uucp> cramer@sun.UUCP (Sam Cramer) writes:
} >>version 1.2, which is now shipping and is available from SuperMac technical
} >>support (415) 964-9660. 
} >I called SuperMac tech support and asked them about this.  They said that
} >they consider DiskFit 1.2 to still be in beta, despite the fact that Dantz 
} >has released it.  I guess this indicates that SuperMac is very cautious 
} >when releasing software.
} >
} >Anyway, the fellow I spoke with said that DiskFit 1.2 is not yet available
} >from SuperMac.
} 
} Well, I just got my copy today (DiskFit 1.2) -- I'm a dataframe owner.  Says
} it has the joining bug fixed, and has some new smartset options.  I'll let
} you know when I've tried it...
} 
Well I called, and basically, if you convince a technical type you need
it they'll send it. Unfortunately, all tech types were busy.

I suspect I could convince them, since my System doesn't fit on one floppy
any more.
-- 
+==== Jim Budler ==== Soon to be at: EDA Systems, Inc and guesting here ===+
| Compuserve: 72415,1200; Delphi: JIMBUDLER;  Usenet: jimb@amdcad.AMD.COM  |