Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!mnetor!uunet!seismo!rochester!cornell!uw-beaver!mit-eddie!husc6!cmcl2!beta!unm-la!unmvax!sandia!intvax!loucks
From: loucks@intvax.UUCP (Cliff Loucks)
Newsgroups: comp.sys.mac
Subject: Switcher and printing.
Message-ID: <304@intvax.UUCP>
Date: Fri, 7-Aug-87 11:29:45 EDT
Article-I.D.: intvax.304
Posted: Fri Aug  7 11:29:45 1987
Date-Received: Sun, 9-Aug-87 05:11:31 EDT
Distribution: na
Organization: Sandia National Labs, Org. 1411, Albq, NM
Lines: 28
Keywords: Bombs

Frequently, but not always, when I'm printing to the LaserWriter
from MacDraft (running under Switcher) my machine will either
suddenly reboot (like the reset switch was pressed) or I'll get a
dialog saying an internal error occured, that my file is OK, and
that I should start printing over again.  The system is:

	Mac Plus (upgraded)
	10 MB Hyperdrive
	System 3.2      (can't use newer system/finder until new
	Finder 5.3       Hyperdrive software is out.)
	LaserWriter and Prep 4.0
	Switcher 5.0.1
	MacDraft 1.2a
	
When the reboot accurs, it is after communication with the
LaserWriter is finished; so while my machine is rebooting the
LaserWriter is successfully printing out the document.

Does anyone see anything incompatible here?  I also haven't been
able to get font substitution to work (from several applications)
but I haven't looked into that much yet.

Thanks, Cliff
-- 
Cliff Loucks   [gatech | ucbvax]!unmvax!sandia!intvax!loucks
Sandia National Labs, Albuquerque, New Mexico

Poor New Mexico;  So far from Heaven, and so close to thathat