Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!mnetor!uunet!seismo!husc6!sri-unix!sri-spam!mordor!lll-tis!lll-lcc!ptsfa!hoptoad!academ!uhnix1!soma!masscomp-request
From: amen@quequeg.UUCP (Bob Amen)
Newsgroups: comp.sys.masscomp
Subject: Hayes chronograph routines?
Message-ID: <3185@soma.bcm.tmc.edu>
Date: Wed, 19-Aug-87 17:57:11 EDT
Article-I.D.: soma.3185
Posted: Wed Aug 19 17:57:11 1987
Date-Received: Sat, 22-Aug-87 19:57:25 EDT
Sender: masscomp@soma.bcm.tmc.edu
Organization: Chesapeake Bay Institute, Physical Oceanography, Shady Side, MD 20764
Lines: 16
Keywords: Hayes clock chronograph
Approved: masscomp@soma.bcm.tmc.edu


	Before I go writing my own versions...has anybody written or seen
routines (or programs) to set and read the time using a Hayes Chronograph
from a Masscomp? We have a couple Hayes clocks sitting around and when we
go to sea with our 535 (ne 5500) we need a way to keep the time accurately
between boots.  (We have to shut down several times a day when the ship goes
on or off shore power or synchronizes its motor-generators and need to keep
the time sync'ed with previous events.)  What I plan is to use a tty port but
may be able to use an sl02 (if we have one spare).

	If nobody has one or more routines written I will do it and send
them to the MUS Software Library.

-- 
	Bob Amen (amen@quequeg.UUCP)
	Chesapeake Bay Institute/Johns Hopkins University (+1 301 338-6329)