Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!dciem!nrcaer!xios!todd
From: todd@xios.XIOS.UUCP (Todd Taylor)
Newsgroups: comp.sys.nsc.32k
Subject: ICM-3216 Clock????
Message-ID: <350@xios.XIOS.UUCP>
Date: Mon, 17-Aug-87 13:04:58 EDT
Article-I.D.: xios.350
Posted: Mon Aug 17 13:04:58 1987
Date-Received: Fri, 21-Aug-87 00:36:30 EDT
Reply-To: todd@xios.UUCP (Todd Taylor)
Distribution: world
Organization: XIOS Systems Corporation, Ottawa, Ontario, Canada
Lines: 34


I was wondering if anyone else in ICM 3216 Land is having my problem with
the clock(s).

I live in EST time zone. (Therefore TZ is EST5EDT ok?)

Sequence:

- boot at say 13:00 and set the date

- shutdown a couple of days later then reboot say the day after

Problem:

- when the reboot occurs, the date is exactly 12 hours behind 

It really isn't much of a problem to change the date, but something
seems bogus here.

By the way I'm new to the net, and have had my ICM for about 1 year.
I am running with Emulex MT-02, and MD-01 controllers, Seagate St-4051
hard disk and Archive Tape.  I fit the whole thing into a PC/XT compatible
flip-top case (modified), less rails and added a muffin fan.  Still runs hot
though, so I was thinking of adding a liquid-nitrogen cooling system :-).

I use it quite regularly at home, and lately have ported tons of net
sources. Why?, why not! I know, expensive toy, but it got me my job!

One more question. Are there any other ICMers in the Ottawa area?

-- 
"I don't have Bell Cellulaire, but I have Usenet!"    H: (613) 829 8051
                                                      B: (613) 725 5411
mnetor!dciem!nrcaer!xios!todd