Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!mnetor!uunet!seismo!rutgers!ames!sdcsvax!ucsdhub!hp-sdd!hplabs!hp-pcd!orstcs!leach
From: leach@orstcs.cs.ORST.EDU
Newsgroups: comp.unix.questions
Subject: ethernet config problem
Message-ID: <217000008@orstcs>
Date: Wed, 29-Jul-87 22:08:00 EDT
Article-I.D.: orstcs.217000008
Posted: Wed Jul 29 22:08:00 1987
Date-Received: Sat, 1-Aug-87 11:06:53 EDT
Lines: 18
Nf-ID: #N:orstcs:217000008:000:654
Nf-From: orstcs.cs.ORST.EDU!leach    Jul 29 19:08:00 1987




Is anyone using a MicroVAX with BSD 4.3 as a gateway?  We are trying to
config 4.3 to have 2 ethernet boards (DEQENA's) and the system keeps
crashing.  When we configure the kernel with one board, the system works
fine.  Both ethernet boards have the right (one fixed and the second one
floating) csr and vector addresses.  When the system locks, both boards 
still work as a gate.  (They still allow you to connect through them.)

If someone is using a MicroVAX in this configuration (or something similar),
could you explain what might be the problem.  Thanks in advance....

				Tom Leach

leach%oregon-state@relay.cs.net
	-or-
hp-pcd!orstcs!leach