Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!mnetor!uunet!seismo!mimsy!chris
From: chris@mimsy.UUCP (Chris Torek)
Newsgroups: comp.unix.wizards
Subject: Re: Foreign peripherals on DWBUA (VAXBI) Unibus
Message-ID: <7900@mimsy.UUCP>
Date: Fri, 7-Aug-87 10:11:59 EDT
Article-I.D.: mimsy.7900
Posted: Fri Aug  7 10:11:59 1987
Date-Received: Sun, 9-Aug-87 05:52:38 EDT
References: <7856@mimsy.UUCP>
Organization: U of Maryland, Dept. of Computer Science, Coll. Pk., MD 20742
Lines: 15

To answer my own questions:

1)  Emulex says the SC41/MS is known to work on DWBUAs.

2)  The manual for the DWBUA is EK-DWBUA-TM, and it has an
    appendix that mentions why certain things do not work on
    the BUA.  I am not sure which (if any) of these apply to
    InterLAN's NI1010A board.

By the way, if anyone ever needs to set an 8[23][05]0 to boot off
the console RX50 (as I am doing), you need to set the EEPROM boot
device to CS21, not CS20.
-- 
In-Real-Life: Chris Torek, Univ of MD Comp Sci Dept (+1 301 454 7690)
Domain:	chris@mimsy.umd.edu	Path:	seismo!mimsy!chris