Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!utgpu!water!watmath!clyde!rutgers!ames!elroy!smeagol!jplgodo!chas2!carlos
From: carlos@chas2.UUCP
Newsgroups: comp.unix.xenix
Subject: System V/AT 2.2 uucp help needed.
Message-ID: <504@chas2.UUCP>
Date: Mon, 3-Aug-87 18:28:33 EDT
Article-I.D.: chas2.504
Posted: Mon Aug  3 18:28:33 1987
Date-Received: Wed, 5-Aug-87 07:22:24 EDT
Reply-To: carlos@chas2.UUCP (Carlos Carrion)
Distribution: na
Organization: Jet Propulsion Laboratory, Pasadena, Ca.
Lines: 21

I am having problems with my Microport V/AT ver 2.2 talking
to other unix machines.  I have followed closely the documentation
instructions: editing L.sys, L-devices, USERFILE, /etc/passwd, /etc/inittab.
But still am having problems.

Initially, I was successful in one-way communication: from my V/AT to another
machine(MASSCOMP 5500 running RTU version ???).  I was uucp'ing files, and sending
mail.

I wanted more, so I put out a getty on /dev/ttyM1 edited the target machine's files:
/etc/passwd,USERFILE,etc...
Now nothing works:  I can't send mail to the target machine, and the target machine
gives me a DIAL FAILED when I do a uustat -m. 

I realize this is not a trivial problem, and have probably not included enough
information,  but ANY help will be appreciated... Thanks...!!!
-- 
---> ...cit-vax!elroy!smeagol!jplgodo!chas2!carlos
Carlos Carrion
Space Flight Operations Center
Jet Propulsion Laboratory MS 301/250D,  Pasadena, CA 91109