Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!mnetor!uunet!husc6!psuvax1!blft1!gah
From: gah@blft1.UUCP (Gregg Houck SysOp)
Newsgroups: comp.unix.xenix
Subject: SCO Xenix 2.1.3 4 terminals slow
Message-ID: <15@blft1.UUCP>
Date: Mon, 10-Aug-87 22:18:04 EDT
Article-I.D.: blft1.15
Posted: Mon Aug 10 22:18:04 1987
Date-Received: Wed, 12-Aug-87 01:23:56 EDT
Lines: 25
Keywords: xenix, computone, ibm, xon/xoff

I am really a UNIX user but have had to install a Xenix system
for a local beer distrbutor.  I am having some problems with
speed when 4 users are on-line working.  Under Unix I would
just add RAM, but that doesn't help with SCO xenix.  I should
hope that there is a fix for this problem.  I have tryed talking
with SCO but not buying a lot from them they said your customers
support time is up but for xxx dollars we will help.  Anyway here
is the configguration.

IBM PC/AT 8Mhz w/ 67 mb Hard Disk and 3mb ram.
Computone outboard 4 SI/O setup for xo/xoff at 9600 baud.
SCO Xenix 2.1.3 runtime only.
3 Wyse 50 terminals. Hard wired using 4 cond phone line.

Any help with this would be of great help to me and my client.

Thankyou,

Gregg Houck
ComputerLand of State College, PA
(814)-237-9000 Voice
(814)-355-9163 Voice Home
(814)-355-7648 UUCP direct 1200 baud nodename= blft1!gah.

or via USENET psuvax1!blft1!gah