Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!mnetor!uunet!seismo!husc6!cmcl2!phri!uccba!finegan
From: finegan@uccba.UUCP (Mike Finegan)
Newsgroups: sci.electronics
Subject: CCD driver/controller
Message-ID: <1207@uccba.UUCP>
Date: Thu, 13-Aug-87 09:38:55 EDT
Article-I.D.: uccba.1207
Posted: Thu Aug 13 09:38:55 1987
Date-Received: Sat, 15-Aug-87 10:48:45 EDT
References: <7105@alice.UUCP> <764@sol.ARPA> <128@umich.UUCP> <20036@ucbvax.BERKELEY.EDU>
Organization: Univ of Cincinnati, College of Business Admin.
Lines: 16
Keywords: TTL, pullups
Summary: CCD driver/controller


	Does anyone have experience, or know where information can be
found about, using a chip to controll a Charge Couple Device - preferably
256 by 256 monochrome - and yield digital output? The desired output
would be 8 bits/pixel at <= 3 microseconds/pixel average. It wouldn't
matter if the CCD and chip were a set, as long as it isn't outrageously
expensive. If there is no such controller, does anyone have recommendations
about the simplest CCD to use, and what A/D will let me unload the CCD
to ram inless than 1/5 of a second? Any suggestions, or sources of further
information will be greatly appreciated.

					Mike Finegan
					Electrical & Computer Engineering
					University of Cincinnati
					(513) 475-2055
					...hal!uccba!ucece1!finegan