Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!mnetor!uunet!munnari!comp.vuw.ac.nz!dsiramd!ray
From: ray@dsiramd.nz (Ray Brownrigg)
Newsgroups: comp.dcom.lans,comp.os.vms
Subject: DECServer 200 intercommunication
Message-ID: <175@dsiramd.nz>
Date: Wed, 9-Sep-87 23:05:13 EDT
Article-I.D.: dsiramd.175
Posted: Wed Sep  9 23:05:13 1987
Date-Received: Sat, 12-Sep-87 16:06:50 EDT
Organization: Applied Maths Div, DSIR, Wellington, New Zealand
Lines: 20
Keywords: LAT-11 DECServer
Xref: mnetor comp.dcom.lans:816 comp.os.vms:2535

We wish to confirm some technical information about DECServer 200s,
also known as DSRVB-AB, namely:

1. On a single DECServer 200, can two terminals communicate with each
other, e.g. in practice can a PC use a printer?

2. On two DECServer 200s connected to the same ethernet, using LAT-11, can
a terminal on one of the DECS200s communicate with a terminal on the other?
If this is the case, how would the "source" terminal (say a PC) address the
"destination" terminal (say a printer) on the other DECS200, that is, what
command would be used?.

Local DEC sources have been unable to confirm either of these items.

Thanks
-- 
Ray Brownrigg		UUCP: {utai!calgary,uunet}!vuwcomp!dsiramd!ray
Applied Maths Div, DSIR		ACSnet:	ray@dsiramd.nz[@munnari]
PO Box 1335			System:	OLIVETTI/AT&T 3B2/400B+, System V R3.0
Wellington, New Zealand			"UNX -rules -OK"