Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!mnetor!uunet!husc6!rutgers!ames!amdcad!sun!texsun!sundc!citcom!peter
From: peter@citcom.UUCP (Peter Klosky)
Newsgroups: comp.unix.questions,comp.dcom.modems
Subject: Re: Help with incoming modems and getty urgently requested!
Message-ID: <76@citcom.UUCP>
Date: Fri, 4-Sep-87 09:53:06 EDT
Article-I.D.: citcom.76
Posted: Fri Sep  4 09:53:06 1987
Date-Received: Sat, 5-Sep-87 19:57:51 EDT
References: <1373@bloom-beacon.MIT.EDU> <7201@steinmetz.steinmetz.UUCP>
Organization: Citcom Systems, Inc., Herndon, VA
Lines: 16
Xref: mnetor comp.unix.questions:3891 comp.dcom.modems:923

> Turn off local echo on the modem. If needed you can put something like
> 	(stty 1200;echo AT;echo ATE0) </dev/yourtty >/dev/yourtty
> in your startup file to init the device at boot time.

Some modems will let you set these settings on a more or less
once when you buy a new modems basis; they have this &W command:
AT&D2&W
AT&Q1&W
AT&E1&W
AT&ATS0&W
We just tip right to the outgoing modem and do it by hand once; this
may not work if your modem tends to forget its settings, or was not even
designed to save them over power-up.
-- 
Peter Klosky, Citcom Systems (materiel de telecommunications)
seismo!vrdxhq!baskin!citcom!peter (703) 689-2800 x 235