Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!mnetor!uunet!husc6!cmcl2!rutgers!ucla-cs!zen!ucbvax!decvax!tektronix!tekgen!tekigm2!timothym
From: timothym@tekigm2.TEK.COM (Timothy D Margeson)
Newsgroups: comp.lang.pascal
Subject: Re: "Inline code with Turbo Pascal"
Message-ID: <2112@tekigm2.TEK.COM>
Date: Fri, 28-Aug-87 14:38:48 EDT
Article-I.D.: tekigm2.2112
Posted: Fri Aug 28 14:38:48 1987
Date-Received: Sun, 30-Aug-87 06:40:48 EDT
References: <3397@ece-csc.UUCP>
Reply-To: timothym@tekigm2.UUCP (Timothy D Margeson)
Organization: Tektronix, Inc., Beaverton, OR.
Lines: 13

Hi,

Why not use the Turbo functions (or procedures) Intr(#,regs) and MSDOS(F,regs).

These two routines will do most everything inline can do with these calls,
perhaps not as fast though.


-- 
Tim Margeson (206)253-5240
PO Box 3500  d/s C1-937                          @@   'Who said that?'  
Vancouver, WA. 98668
{amd..hplabs}cae780!tektronix!tekigm2!timothym (this changes daily)