Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!mnetor!uunet!husc6!rutgers!ucla-cs!zen!ucbvax!noao.UUCP!grandi
From: grandi@noao.UUCP (Steve Grandi)
Newsgroups: comp.laser-printers
Subject: Apple Laserwriter on a 4.3BSD VAX
Message-ID: <8708292030.AA24230@brillig.umd.edu>
Date: Fri, 28-Aug-87 17:14:08 EDT
Article-I.D.: brillig.8708292030.AA24230
Posted: Fri Aug 28 17:14:08 1987
Date-Received: Fri, 4-Sep-87 05:46:04 EDT
Sender: daemon@ucbvax.BERKELEY.EDU
Organization: National Optical Astronomy Observatories, Tucson, AZ
Lines: 28
Approved: laser-lovers@brillig.umd.edu


How does one set up a proper /etc/printcap for an Apple Laserwriter on a
4.3BSD system?  I want to run TeX output and ditroff output generated by
Pipeline's devps.

I'm not running Adobe Transcript on the 4.3BSD VAX, but I've cribbed the 
printcap entry from a Sun which is, and the entry is as follows:

lp2|lw2:\
	:lp=/dev/lw:\
	:br#9600:rw:fc#0000374:fs#0000003:xc#0:xs#0040040:mx#0:sf:sb:\
	:sd=/usr/spool/lw2:\
	:lf=/usr/spool/lw2/lw-log:

According to my reading of tty(4), the mode bits set CBREAK and TANDEM and
LDECCTQ and LLITOUT.

I can tip to /dev/lw and converse with the laser printer, and I can
"cat file.ps > /dev/lw" and get nice clean output.  Yet if I 
"lpr -Plw2 file.ps", strange things happen.  The Laserwriter's yellow
light blinks for the appropriate amount of time and I can see lights moving
around down inside the cover release cutout; but no pages are printed.

Any ideas?  Any working printcaps?
-- 
Steve Grandi, National Optical Astronomy Observatories, Tucson, AZ, 602-325-9228
UUCP: {arizona,decvax,hao,ihnp4}!noao!grandi  or  uunet!noao.arizona.edu!grandi 
Internet: grandi@noao.arizona.edu     SPAN/HEPNET: 5356::GRANDI or DRACO::GRANDI