Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!mnetor!uunet!seismo!rutgers!ucla-cs!zen!ucbvax!druks.att.COM!kwf
From: kwf@druks.att.COM (FeltonK)
Newsgroups: comp.laser-printers
Subject: symphony output to laser jet
Message-ID: <8708292047.AA24832@brillig.umd.edu>
Date: Mon, 24-Aug-87 10:28:54 EDT
Article-I.D.: brillig.8708292047.AA24832
Posted: Mon Aug 24 10:28:54 1987
Date-Received: Fri, 4-Sep-87 07:09:17 EDT
Sender: daemon@ucbvax.BERKELEY.EDU
Organization: AT&T, Denver, CO
Lines: 10
Keywords: initialization string
Approved: laser-lovers@brillig.umd.edu


I would like some information about sending initialization strings
from an IBM compatible PC running Symphony on MS-DOS 3.1 to a
Hewlett Packard Laser Jet (not laser jet+).  I was trying to use the
Lotus initialization strings to output "landscape" format (turn page
on legal size paper) to the Laser Jet.  The Laser Jet ignored the strings 
I input through Symphony and printed the default format.  If there is
anyone out there in net-land that could help, I would appreciate it.
				Thanks in Advance,
				 Kyle Felton (303) 538-2180