Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!mnetor!uunet!husc6!cmcl2!rutgers!labrea!jade!ucbvax!hpfcmp.hp.COM!rjn
From: rjn@hpfcmp.hp.COM (Bob Niland)
Newsgroups: comp.laser-printers
Subject: Re: HP Laser Jet
Message-ID: <8709052040.AA12158@brillig.umd.edu>
Date: Tue, 1-Sep-87 10:05:57 EDT
Article-I.D.: brillig.8709052040.AA12158
Posted: Tue Sep  1 10:05:57 1987
Date-Received: Sat, 12-Sep-87 19:23:10 EDT
References: <8708292043.AA24704@brillig.umd.edu>
Sender: daemon@ucbvax.BERKELEY.EDU
Organization: Hewlett-Packard, Ft. Collins CO
Lines: 17
Approved: laser-lovers@brillig.umd.edu


re: "Does anyone out there know if it is possible to upgrade the memory of
     an HP Laser Jet (not the II) to the equivalent of an HP Laser Jet+."

The now-discontinued HP 26053A kit upgrades a 2686A (std) LaserJet to the
full 2686A Option 300 LaserJet+ configuration.  You end up with dual
interfaces, 512K RAM and PCL Level 4 command set.  Some dealers may still
have this kit in stock.

The 26053A was replaced early this year by the 26054A, which expanded the
RAM in the '53 kit to 2 Mbytes.  This kit is still available, but its list
price (about $2500, as I recall) is the same as buying a whole new 33440A
LaserJet-II :-(

Regards,                                              Hewlett-Packard
Bob Niland                                            3404 East Harmony Road
[ihnp4|hplabs]!hpfcla!rjn     hpu...!hpfcse!rjn       Fort Collins CO  80525