Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!mnetor!uunet!seismo!ut-sally!husc6!rutgers!sunybcs!canisius!healy
From: healy@canisius.UUCP (Patrick Healy @ Sigma Systems)
Newsgroups: comp.os.vms
Subject: Foreign Terminal Setup on an uVAX I...
Message-ID: <1744@canisius.UUCP>
Date: Tue, 8-Sep-87 12:01:55 EDT
Article-I.D.: canisius.1744
Posted: Tue Sep  8 12:01:55 1987
Date-Received: Wed, 9-Sep-87 04:39:55 EDT
Organization: Canisius College, Buffalo N.Y. 14208
Lines: 36
Keywords: MicroVAX I


>The information is somewhere in the SMG manual.  What you need to do is:
>	1) Compile the termtable definition you've created.  To do this:
>		$ RUN SYS$SYSTEM:SMGBLDTRM
>	2) Make the termtable definition available for use.  If you're just
>	   an unprivileged user, or want to test a new definition without
>	   putting other users at risk:
>		$ DEFINE/JOB TERM$TABLOC directoryspec
>	   where "directoryspec" is the directory in which you've just
>	   built TERMTABLE.EXE.  If you're a system manager and want to
>	   make the new definitions the default for the system:
>		$ RUN SYS$SYSTEM:SMGMAPTRM
>	   and reboot the system.

I'm trying to hook up a number foreign terminals to a }iMicroVAX I.  The problem
being, I've got no SYS$SYSTEM:SMGBLDTRM program to run that woul help me build
a new TERMTABLE.EXE.  Has anyone got any ideas?  I'm stumped...


Thanks!

Pat.




 
-----------------------------------------------------------------------------
USNAIL: Patrick Healy / Sigma Systems Technology / 
        5813 Main St. P.O. Box 634 / Williamsville, New York  14221
VOICE:  (716) 634-8787
UUCP:  ...!{decvax|watmath|allegra|rocksvax}!sunybcs!canisius!sigmast!pjh
                           "             ...!ames!canisius!sigmast!pjh
                           "             ...!sunybcs!canisius!healy
CSNET:  healy%canisius@CSNET-relay
-----------------------------------------------------------------------------