Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!mnetor!uunet!husc6!mit-eddie!ll-xn!ames!sdcsvax!ucbvax!UMASS.BITNET!MILTY
From: MILTY@UMASS.BITNET
Newsgroups: comp.os.vms
Subject: Help Wanted for Image Processing Boards
Message-ID: <870914123142315.AVHF@Mars.UCC.UMass.EDU>
Date: Mon, 14-Sep-87 12:31:52 EDT
Article-I.D.: Mars.870914123142315.AVHF
Posted: Mon Sep 14 12:31:52 1987
Date-Received: Wed, 16-Sep-87 02:32:24 EDT
Sender: daemon@ucbvax.BERKELEY.EDU
Organization: The ARPA Internet
Lines: 21

I have the Data Translation High Resolution frame grabber board DT2651
and coprocessing board DT2658, and a MicroVax II/GPX running MicroVMS 4.5
and VWS window services 3.1.  If anyone has drivers for these boards or
could offer suggestions about how to address the memory and control
registers on the Q-Bus, please let me know.  My addresses are:
             BITnet:  milty@umass
             ARPAnet: milty%umass.bitnet@wiscvm.arpa

       Snail Mail:
                Dave Martin
                701 Graduate Research Tower
                Amherst, MA  01003

        Telephone:  (413) 545-0044.

I have noted from UNIX-WIZARDS digest that xwang@hubcap.clemson.edu is
looking for similar information for a system running Ultrix-32m.  Thanks
in advance for any advice or suggestions,               Dave Martin
PS: since the BITnet address above is on a Cyber known to cough up mail
due to incorrect formatting, I can also be reached at martin@umaecs which
is on a VaxCluster.   Thanks again.