Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP Path: utzoo!mnetor!uunet!husc6!mit-eddie!ll-xn!ames!sdcsvax!ucbvax!DHHDESY3.BITNET!F31HEI From: F31HEI@DHHDESY3.BITNET Newsgroups: comp.os.vms Subject: Error INSVIRMEM Message-ID: <8709181413.AA10138@ucbvax.Berkeley.EDU> Date: Fri, 18-Sep-87 10:14:53 EDT Article-I.D.: ucbvax.8709181413.AA10138 Posted: Fri Sep 18 10:14:53 1987 Date-Received: Sun, 20-Sep-87 01:56:37 EDT Sender: daemon@ucbvax.BERKELEY.EDU Organization: The ARPA Internet Lines: 22 After defining many logicals (>30) in systartup.com and sylogin.com 00000100 I have the problem that the command 00000200 SHOW LOGICAL 00000300 won't work. It gives the error message: 00000400 %LIB-F-INSVIRMEM, insufficient virtual memory 00000500 I searched the system messages manual, but can't find this message 00000510 with the Facility LIB. 00000520 00000530 We are working on a uVAX II VAX-Station under VMS 4.5/WS V3.0 with 00000540 9 MByte Memory. 00000600 In SYSGEN the VIRTUALPAGECNT Parameter is set to 00000700 Current=50000,default=8192,minimum=512,maximum=300000 pages 00000800 Setting it to 300000 does not help. 00000900 System page file is 20000 block, swap file is 6000 blocks. 00001000 Also there are parameters PGFLQOUTA and WSQUOTA. Since I'm totally 00001100 new in system management on a VAX I have no idea which parameter 00001200 I have to change. Any help to this problem is welcome, please 00001300 send answers direct to 00001400 Bitnet address: F31HEI@DHHDESY3 00001500 or to INFO-VAX, if you can't reach me. 00001600 Thanks in advance, F.-H. Heinsius 00001700