Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!mnetor!uunet!husc6!bbn!aoa!mbr
From: mbr@aoa.UUCP (Mark Rosenthal)
Newsgroups: comp.protocols.tcp-ip
Subject: Anybody using CMC Transerver? (Was: Ethernet Terminal Servers?)
Message-ID: <438@aoa.UUCP>
Date: Fri, 18-Sep-87 12:32:00 EDT
Article-I.D.: aoa.438
Posted: Fri Sep 18 12:32:00 1987
Date-Received: Sun, 20-Sep-87 03:14:43 EDT
Reply-To: mbr@aoa.UUCP (Mark Rosenthal)
Organization: Adaptive Optics Assoc., Cambridge, Mass. USA
Lines: 12

In discussing the topic of Ethernet Terminal Servers, many people have
reported on their experiences with Encore, Bridge, and Cisco.  Is anybody
out there using the CMC Transerver?  What do you think of it?  How good
are its implementations of TCP/IP, telnet, rlogin?  Can it drive all
10 lines at 9600 baud?  19.2 baud?  What RS232 signals does it implement
besides TxD, RxD, and Sig Gnd?  Can individual lines be configured to pass
8-bit binary to a device (i.e. not put a special interpretation on any
particular character, not discard NULL bytes)?
-- 
	Mark of the Valley of Roses
	...!{harvard,ima}!bbn!aoa!mbr
	...!{wjh12,mit-vax}!biomed!aoa!mbr