Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP Path: utzoo!mnetor!uunet!husc6!cmcl2!beta!unm-la!unmvax!sandia!intvax!miller From: miller@intvax.UUCP (Dave Miller) Newsgroups: comp.sys.amiga Subject: Need help using HP Laserjet II with AMIGA Message-ID: <320@intvax.UUCP> Date: Thu, 27-Aug-87 12:20:32 EDT Article-I.D.: intvax.320 Posted: Thu Aug 27 12:20:32 1987 Date-Received: Sat, 29-Aug-87 10:27:50 EDT Organization: Sandia National Labs, Org. 1411, Albq, NM Lines: 28 Keywords: Laserjet print cable I recently purchased an HP Laserjet II for my AMIGA 1000 and interfaced it through the parallel port using the same printer cable that I have been using with my Epson JX-80 and Silvereed daisy-wheel printer. I have not been able to get anything out on the printer except for the test pattern which comes out off-line and not from the AMIGA. I have the printer set up correctly in parallel mode, and I have Preferences set to use the HP_LaserJet_PLUS driver and parallel port under Workbench 1.2. I've tried to print from CLI by doing a COPY to PRT:. I've also tried from Notepad, Scribble!, and City Desk (which includes its own HP driver and specifically supports the HP). I either get the "Printer Trouble" window which says "Check Printer or Cable", or the machine just hangs up. I also tried the serial port using my modem cable and had no luck with this either. It appears to be a cable problem, but this implies the need for different cables for different printers. I WOULD GREATLY APPRECIATE ANY HELP FROM ANYONE WHO HAS SUCCESSFULLY USED THE LASERJET II WITH THEIR AMIGA. Thanks, David J. Miller Sandia National Labs P. O. Box 5800 Albuquerque, New Mexico, 87185 (505)-844-9662 ucbvax!unmvax!sandia!intvax!miller gatech!unmvax!sandia!intvax!miller