Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!utgpu!water!watmath!clyde!rutgers!ucla-cs!zen!bryce
From: bryce@zen.UUCP
Newsgroups: comp.sys.amiga
Subject: Better video, in three easy steps.
Message-ID: <3795@zen.berkeley.edu>
Date: Thu, 17-Sep-87 03:07:10 EDT
Article-I.D.: zen.3795
Posted: Thu Sep 17 03:07:10 1987
Date-Received: Sat, 19-Sep-87 08:59:09 EDT
Sender: news@zen.berkeley.edu
Organization: Center Tapped Solids, Inc.
Lines: 18


How to improve your Amiga 2000's video a lot and your Amiga 500's a little
(In three easy steps):

1> Trace the R G and B signals from the video connector back to three
ferrite beads.	(Ferrite is a hard dark substance.  The signals will be
run or looped through.  There may be a component that looks like a ceramic
capacitor with three leads instead.)

2> Using a soldering iron, remove the three components.

3> Replace the gap with solid wire.  (heavy gauge preferred)

 
|\ /|  . Ack! (NAK, ENQ, SYN)
{o O} . 
 (") 	bryce@hoser.berkeley.EDU -or- ucbvax!hoser!bryce
  U	How can you go back if you have not yet gone forth?