Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!mnetor!uunet!husc6!cca!mirror!rayssd!unisec!softie!mrr
From: mrr@softie.UUCP (Mark Rinfret)
Newsgroups: comp.sys.amiga
Subject: Re: Need Intuition Help
Message-ID: <89@softie.UUCP>
Date: Wed, 16-Sep-87 09:35:35 EDT
Article-I.D.: softie.89
Posted: Wed Sep 16 09:35:35 1987
Date-Received: Sat, 19-Sep-87 14:06:14 EDT
References: <86@softie.UUCP> <27908@sun.uucp>
Organization: SofTech, Inc. Middletown, RI
Lines: 22
Keywords: menus,NextSelect,gadgets
Summary: It's not a casting problem...

In article <27908@sun.uucp=, cmcmanis%pepper@Sun.COM (Chuck McManis) writes:
= 
= AddGlist() and RemoveGlist() should not have any different alignment require-
= ments than AddGadget() or RemGadget() do. The only difference being a numeric
= parameter to indicate the number of gadgets to add or remove. Since you are
= using Aztec C my first guess would be that you are not casting the number of
= gadgets to a long ...

Nope.  I learned that one a long time ago.  In fact, that's always the first
thing I look for when the Guru visits.  I think Bob Tolly's response  (improper
parameter to register mapping for AddGlist, etc.) might be correct.  As soon as I get a chance to check it out, I'll post some info.

= --Chuck McManis

Mark


-- 
< Mark R. Rinfret,        mrr@softie, ..rayssd!unisec!softie!mrr             >
< SofTech, Inc.           Home: 401-846-7639                                 >
< 1 Silva Lane,           Work: 401-849-4174                                 >
< Middletown, RI 02840    "The name has changed but I'm still guilty."       >