Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!utgpu!water!watmath!clyde!cbosgd!ihnp4!ihlpf!store2
From: store2@ihlpf.UUCP
Newsgroups: comp.sys.atari.8bit
Subject: Re: 1050 schematic needed
Message-ID: <2075@ihlpf.ATT.COM>
Date: Tue, 1-Sep-87 08:45:36 EDT
Article-I.D.: ihlpf.2075
Posted: Tue Sep  1 08:45:36 1987
Date-Received: Wed, 2-Sep-87 07:15:05 EDT
References: <6738@mhuxu.UUCP>
Organization: AT&T Bell Laboratories - Naperville, Illinois
Lines: 22
Summary: source for schematic

In article <6738@mhuxu.UUCP>, david1@mhuxu.UUCP (Rick Nelson) writes:
> 
> My 1050 disk drive died recently and I'm wondering where to get schematics.  

One source of parts and schematics is American Techna-Vision.  They have the
SAMS service manual for the 1050 for $19.50.  They have IC's, circuit pack
assemblies and complete drive mechanisms.  Their address is:

			American Techna-Vision
			15338 Inverness St.
			San Leandro, CA 94579
			1-800-551-9995 or
			(415)-352-3787

They accept credit cards. They also do repair if you can't figure out the
problem.  Service rate for the 1050 is $85.

Hope this helps...

					Kit Kimes  
					AT&T--Information Systems Labs
					...ihnp4!iwvae!kimes