Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!mnetor!uunet!husc6!mit-eddie!ll-xn!ames!ptsfa!ihnp4!mhuxu!david1
From: david1@mhuxu.UUCP (Rick Nelson)
Newsgroups: comp.sys.atari.8bit
Subject: 1050 schematic needed
Message-ID: <6738@mhuxu.UUCP>
Date: Mon, 31-Aug-87 09:05:20 EDT
Article-I.D.: mhuxu.6738
Posted: Mon Aug 31 09:05:20 1987
Date-Received: Sat, 5-Sep-87 00:37:29 EDT
Organization: Rick Nelson, Bell Labs, Reading, Pa.
Lines: 10


My 1050 disk drive died recently and I'm wondering where to get schematics.  
The power on/off LED comes on, but nothing happens after that.  I put a disk in 
and nothing.  I took it apart and nothing wrong was obvious visually.  I 
measured the voltage from Vdd-Gnd on various dips, but got nothing.  I'm 
wondering if the power supply died.  Have any info?

Rick Nelson
mhuxu!david1
Bell Labs, Reading, Pa.