Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!mnetor!uunet!husc6!sri-unix!ctnews!pyramid!prls!philabs!sbcs!lean
From: lean@sbcs.UUCP (Lean l Loh)
Newsgroups: comp.sys.atari.st
Subject: re: TOS error numbers
Message-ID: <516@sbcs.UUCP>
Date: Wed, 2-Sep-87 10:57:13 EDT
Article-I.D.: sbcs.516
Posted: Wed Sep  2 10:57:13 1987
Date-Received: Sat, 5-Sep-87 10:12:24 EDT
Organization: Computer Science Dept, SUNY@Stony Brook
Lines: 39


 This was posted by Andrew Ness quite a while ago.  So here goes:


Tos Error Number 		Meaning
----------------		-------
	  0			Ok, No error
	 -1			General error
	 -2			Drive not ready
	 -3			Unknown command
	 -4			CRC error
	 -5			Bad request (invalid command)
	 -7			Seek error (track not found)
	 -8			Sector not found
	 -9			Printer error (no paper?)
	-10			Write error
	-11			Read error
	-12			General error
	-13			Disk write-protected
	-14			Disk was changed
	-15			Unknown device
	-16			Bad sector encountered during verify
	-17			No disk in drive
	-32			Invalid function error
	-33			File not found
	-34			Path not found
	-35			Too many files open
	-36			Access not possible
	-37			Invalid handle number
	-39			Not enough memory
	-40			Invalid memory block address
	-46			Invalid drive spec
	-49			No more files


-- 
CSNET: lean@sbcs.csnet
ARPA: lean%suny-sb.csnet@csnet-relay.arpa
UUCP: {allegra, hocsd, philabs, ogcvax}!sbcs!lean